Heated Apparel Not Working? Here’s How to Fix It Fast
Have trouble with your heated apparel not heating up? Don’t worry, we’ve got you covered! In this guide, we’ll walk you through some simple steps to identify and fix common issues. Let's get your jacket warming you up again in no time!
Having trouble with your heated apparel not warming up? Don’t worry—we’ve got you covered. This guide walks you through simple steps to identify and fix common issues, so you can get your heated jacket working again in no time.
1. Recharge the battery for 1–5 minutes and look for the blinking indicator light—this means the battery is charging.
2. Try using the battery to charge a phone or another device.
Connect the Battery to the Apparel
1. Plug the apparel cable into the battery’s DC port.
2. Watch the power button on the apparel—if it flashes red, white, and blue briefly (or just red for square-button models), it means the connection is recognized.
Troubleshoot the Connection
1. If the button doesn’t flash, unplug and reconnect the cable to ensure a secure connection.
2. If the battery is functional but the button still doesn’t flash, there may be an issue with the heating elements.
Try Powering It On
1. If the button flashes during connection, press and hold it for 3 seconds to enter preheat mode (you should see a red light).
2. If no light appears after pressing, the heating elements may still be the issue.
If none of these steps resolve the problem, please send a short troubleshooting video along with your order number and the S/N (Serial Number) located beneath the care label to our customer support team. We’ll help you resolve the issue promptly and ensure you receive a satisfactory solution.
If the Heating Elements Aren’t Warming Up After Turning On
Turn On the Heated Apparel:
1. Connect the apparel cable to the battery.
2. Press and hold the power button for 3 seconds to turn it on.
3. The power button should flash red, indicating the 5-minute preheating phase. After that, it will automatically switch to the medium heat level (blinking white light).
Give It Time to Heat:
1. If the apparel powers on correctly, zip it up and wait 1–5 minutes to allow the heat to build.
2. Important: Ensure the battery is placed in its designated battery pocket—not on a heating element.
3. Then, touch the garment to check if the heating elements are warming up.
Still Not Working?
1. If you don’t feel any warmth, please provide your order number along with the S/N (Serial Number) located under the care label.
2. Our customer support team will help you arrange an exchange.
If the Heating Element Isn’t Getting as Hot as Expected
Power On the Apparel
1. Connect the battery to your heated clothing.
2. Press and hold the power button for 3–5 seconds to turn it on.
3. Then, press the button once until the light turns solid red—this sets the apparel to the highest heat setting.
Retain Heat
1. Zip up the apparel and wait 1–5 minutes to allow the heat to build and circulate.
2. For best results, check the area near the heating elements by touch or use a thermometer to measure the temperature.
Keep in Mind
1. The heating temperature is regulated by internal elements, so the surface warmth may feel slightly lower than expected.
You're now all set to troubleshoot your Venustas heated apparel! If issues continue, don’t hesitate to reach out—our friendly customer support team is here to help. Stay warm and enjoy every adventure!
A video showing how to operate the vest is needed. You do have trouble shooting videos. If you post one please let me know.
Conrad Krisher
December 13, 2025
A wonderful warm vest once I finally figured out how to use it. A lot of frustration could eliminated if there was just an operational slip included in the box rather than just all ‘don’t does’ and warnings. Simple operation instructions would really be helpful !!
Discover the best heated vests for outdoor photography. Compare four Venustas styles designed to keep photographers warm and comfortable during wildlife photography, hiking, and cold-weather adventures.
Venustas proudly sponsors HawkWatch International’s winter fieldwork, providing heated apparel to support crews working outdoors to protect Golden Eagles across the American West.
Venustas continues its partnership with the Raynaud’s Association for the Map the Winter Warmth Giveaway. Help reach 2,000 pins to unlock two heated apparel prizes and support the Raynaud’s community.
Learn how heated apparel can provide extra warmth for people living with Raynaud’s phenomenon. Discover how heated gloves and socks can support everyday comfort through real user experiences.
Choosing heated clothing for kids? Compare heated jackets and vests, explore FELLEX® insulation and fleece styles, and find the right fit for school, everyday wear, and outdoor adventures.
Venustas introduces the Volcano™ Pro Dual-Battery 12V Heated Vest, featuring up to 41W of heating power, six heating zones and flexible power options, alongside 200 limited Founder Passes with exclusive pre-launch benefits.
2 Comments
Rich Warfield
May 07, 2026
A video showing how to operate the vest is needed. You do have trouble shooting videos. If you post one please let me know.
Conrad Krisher
December 13, 2025
Leave a comment